for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 1 HMC340ALP5 / 340alp5e gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz v00.0710 general description features functional diagram conversion loss: 8.0 db lo/ r f i solation: 45 db lo/ i f i solation: 33 db i nput i p3: +20 dbm conversion gain balance: 0.1 db 32 lead 5x5mm s mt package: 25mm 2 e lectrical specifcations, t a = +25 c, as a function of lo drive typical applications the HMC340ALP5 / HMC340ALP5 e dual mixer is ideal for: ? wireless i nfrastructure ? wireless local loop ? i mage r eject mixer ? i /q modulator ? ss b modulator the HMC340ALP5( e ) is a double balanced dual mixer covering 1.7 - 4.5 ghz r f/lo range. this passive mm i c mixer is constructed of gaas s chottky diodes and on-chip baluns. the device can be used as an upconverter, downconverter, bi-phase (de)modula - tor, or phase comparator. the mixer symmetry of the HMC340ALP5( e ) make it ideal for combining with external hybrids to implement a single sideband upconverter or image reject downconverter assembly. the consistent mm i c performance will improve system operation and assure regulatory compliance. a r oh s compliant, leadless 5x5 mm qfn surface mount package (lp5) houses the dual mm i c mixer i c. parameter lo = +13 dbm i f = 100 mhz units min. typ. max. min. typ. max. frequency r ange, r f & lo 1.7 - 4.5 3.4 - 3.8 ghz frequency r ange, i f dc - 1.5 dc - 1.5 ghz conversion loss 8 10 8 10 db conversion gain amplitude balance 0.10 0.25 0.10 0.25 db noise figure ( ss b) 8 10 8 10 db lo to r f i solation 30 45 40 47 db lo to i f i solation 25 33 33 38 db i p3 ( i nput) 20 23 dbm 1 db gain compression ( i nput) 12 13 dbm * unless otherwise noted, all measurements performed as single channel downconverter.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 2 single channel: conversion gain vs. temperature @ lo = +13 d b m -20 -15 -10 -5 0 1 1.5 2 2.5 3 3.5 4 4.5 5 +25 c +85 c - 40 c conversion gain (db) rf frequency (ghz) -20 -15 -10 -5 0 1 1.5 2 2.5 3 3.5 4 4.5 5 lo= +9 dbm lo= +11 dbm lo= +13 dbm lo= +15 dbm conversion gain (db) rf frequency (ghz) -60 -45 -30 -15 0 1 1.5 2 2.5 3 3.5 4 4.5 5 rf to if lo to rf lo to if isolation (db) frequency (ghz) -20 -15 -10 -5 0 1 1.5 2 2.5 3 3.5 4 4.5 5 lo rf return loss (db) frequency (ghz) -20 -15 -10 -5 0 0 0.5 1 1.5 2 return loss conversion gain response (db) if frequency (ghz) single channel: input p1d b vs. temperature @ lo = +13 d b m 8 9 10 11 12 13 14 15 1 1.5 2 2.5 3 3.5 4 4.5 5 +25 c +85 c - 40 c p1db (dbm) rf frequency (ghz) single channel: conversion gain vs. lo drive single channel: isolation @ lo = +13 d b m single channel: r eturn l oss @ lo = +13 d b m single channel: if b andwidth @ lo = +13 d b m HMC340ALP5 / 340alp5e v00.0710 gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 3 single channel: input ip3 vs. temperature @ lo = +13 d b m single channel: input ip2 vs. temperature @ lo = +13 d b m 10 15 20 25 30 1.5 2 2.5 3 3.5 4 4.5 5 lo= +11 dbm lo= +13 dbm lo= +15 dbm ip3 (dbm) rf frequency (ghz) 10 15 20 25 30 1.5 2 2.5 3 3.5 4 4.5 5 +25c +85c -40c ip3 (dbm) rf frequency (ghz) 30 35 40 45 50 55 60 65 70 1.5 2 2.5 3 3.5 4 4.5 5 lo= +11 dbm lo= +13 dbm lo= +15 dbm ip2 (dbm) rf frequency (ghz) 30 35 40 45 50 55 60 1.5 2 2.5 3 3.5 4 4.5 5 +25c +85c -40c ip2 (dbm) rf frequency (ghz) single channel: u pconverter conversion gain vs. lo drive -20 -15 -10 -5 0 1.5 2 2.5 3 3.5 4 4.5 5 lo= +9 dbm lo= +11 dbm lo= +13 dbm lo= +15 dbm conversion gain (db) rf frequency (ghz) 5 10 15 20 25 30 1.5 2 2.5 3 3.5 4 4.5 5 lo= +11 dbm lo= +13 dbm lo= +15 dbm ip3 (dbm) rf frequency (ghz) single channel: input ip3 vs. lo drive single channel: input ip2 vs. lo drive single channel: u pconverter ip3 vs. lo drive HMC340ALP5 / 340alp5e v00.0710 gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 4 -110 -100 -90 -80 -70 1.5 2 2.5 3 3.5 4 4.5 5 rf1 to if2 rf2 to if1 isolation (db) rf frequency (ghz) -70 -60 -50 -40 -30 -20 1.5 2 2.5 3 3.5 4 4.5 5 isolation (db) lo frequency (ghz) -70 -60 -50 -40 -30 -20 1.5 2 2.5 3 3.5 4 4.5 5 isolation (db) rf frequency (ghz) -100 -80 -60 -40 -20 0 0.5 1 1.5 2 isolation (db) if frequency (ghz) dual channel: conversion gain amplitude b alance dual channel: channel to channel isolation dual channel: lo 1 to lo 2 isolation dual channel: r f1 to r f2 isolation dual channel: if1 to if2 isolation -1 -0.5 0 0.5 1 1 2 3 4 5 amplitude balance (db) frequency (ghz) harmonics of lo lo freq. (ghz) nlo s pur at r f port 1 2 3 4 1.5 39 29 57 68 2.0 40 26 63 68 2.5 43 28 41 63 3.0 44 38 63 67 3.5 44 48 66 70 4.0 42 49 63 67 4.5 38 49 63 83 5.0 36 53 59 89 lo = +13 dbm values in dbc below input lo level measured at r f port. HMC340ALP5 / 340alp5e v00.0710 gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 5 o utline drawing absolute maximum r atings r f / i f i nput +13 dbm lo drive +27 dbm channel temperature 150c continuous pdiss (t = 85 c) (derate 16.55 mw/ c above 85 c) 1.07 w thermal r esistance ( r th ) (junction to package base) 60.4 c/w s torage temperature -65 to +150 c operating temperature -40 to +85 deg c mx n spurious o utputs nlo m r f 0 1 2 3 4 0 xx 11 20 36 45 1 19 0 26 37 41 2 71 67 67 68 71 3 86 86 85 78 78 4 86 86 86 86 86 r f = 3.5 ghz @ -10 dbm lo = 3.6 ghz @ +13 dbm all values in dbc below i f power level e l e ct ro s tat ic se n si t i v e de v ic e ob ser v e handl i ng p re caut i on s not es: 1. l e adf r am e mat eri al: copp er alloy 2. d i m e n si on s a re i n i nch es [m i ll i m e t ers ] 3. l e ad s pac i ng tol er anc e is non-cumulat i v e . 4. pad bu rr l e ngth s hall b e 0.15mm ma xi mum. pad bu rr h ei ght s hall b e 0.05mm ma xi mum. 5. packag e wa r p s hall not ex c ee d 0.05mm. 6. all g r ound l e ad s and g r ound paddl e mu s t b e s old ere d to pcb r f g r ound. 7. re f er to h i tt i t e appl i cat i on not e fo r s ugg es t e d land patt er n. part number package body material lead finish m s l r ating package marking [3] HMC340ALP5 low s tress i njection molded plastic s n/pb s older m s l1 [1] h340a xxxx HMC340ALP5 e r oh s -compliant low s tress i njection molded plastic 100% matte s n m s l1 [2] h340a xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx package information HMC340ALP5 / 340alp5e v00.0710 gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 6 pin number function description i nterface s chematic 1, 2, 4, 5, 7-11, 13-18, 20, 21, 23-28, 30-32 n/c no connection. these pins may be connected to r f ground without affecting performance. 3, 6 lo1, lo2 lo port: this pin is dc coupled and matched to 50 ohms. 12, 29 i f2, i f1 i f port: this pin is dc coupled. for applications not requiring operation to dc, this port should be dc blocked externally using a series capacitor whose values has been chosen to pass the necessary i f frequency range. for operation to dc, this pin must not source/sink more than 4ma of current or die non-function and possible die failure will result. 19, 22 r f2, r f1 r f port: this pin is dc coupled and matched to 50 ohms. package bottom gnd package bottom must be connect to r f/dc ground. pin descriptions HMC340ALP5 / 340alp5e v00.0710 gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 7 application circuit for use as an i/q modulator application circuit for use as an i r m mixer HMC340ALP5 / 340alp5e v00.0710 gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 8 e valuation pc b the circuit board used in the application should use r f circuit design techniques. s ignal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con - nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. i tem description j1 - j6 pcb mount s ma r f connector u1 HMC340ALP5( e ) dual mixer pcb [2] 107467 e valuation board [1] r eference this number when ordering complete evaluation pcb [2] circuit board material: r ogers 4350 l ist of materials for e valuation pc b 107482 [1] HMC340ALP5 / 340alp5e v00.0710 gaas mmic smt double- ba l a n c e d d u a l m i xer, 1.7 - 4.5 ghz
|
